LES VLAN

Rappel du premier message :

BONJOUR

comment affecter un port à plusieurs vlan

exemple : j'ai un poste que je voudrai faire communiquer avec plusieurs serveur et chaque serveur appartient à un vlan serveur compta(vlan10) serveur exchange(vlan20) serveur kaspersky(vlan30)

merci pour votre aide

yamkalak dir wa7d vlan 99 f poste li bghitih ykominilk m3a les autres serveur ot affectet lih les port dial les ord wdir fih mode trunk wrah aykhdmlik

Wéé mais chnahiya la config li ghadi nktbouhaa ,??

Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vlan 10 name wiam
VLAN 10 modified:
Name: wiam
Switch(vlan)#vlan 20 name sabah
VLAN 20 modified:
Name: sabah
Switch(vlan)#vlan 30 name fatiha
VLAN 30 modified:
Name: fatiha
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int f 0/4
Switch(config-if)#swi
Switch(config-if)#switchport mode
Switch(config-if)#switchport mode a
Switch(config-if)#switchport mode access

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to down
Switch(config-if)#swi
Switch(config-if)#switchport acc
Switch(config-if)#switchport access vlan 10
Switch(config-if)#int f 0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#int f 0/2
Switch(config-if)#sw
Switch(config-if)#switchport m
Switch(config-if)#switchport mode a
Switch(config-if)#switchport mode access
Switch(config-if)#sw
Switch(config-if)#switchport a
Switch(config-if)#switchport access v
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#vlan 99
Switch(config-vlan)#exit
Switch(config)#int f 0/1
Switch(config-if)#swi
Switch(config-if)#switchport mode t
Switch(config-if)#switchport mode trunk

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to up

Switch(config-if)#swi
Switch(config-if)#switchport tru
Switch(config-if)#switchport trunk n
Switch(config-if)#switchport trunk native vlan 99
Switch(config-if)#
Switch(config-if)#exit
Switch(config)#int vlan 99
Switch(config-if)#ip add 192.168.10.27 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#exit
Switch(config)#int range f 0/1-4
Switch(config-if-range)#switchpo
Switch(config-if-range)#switchport mode
Switch(config-if-range)#switchport mode trunk n
Switch(config-if-range)#switchport mode trunk nat
Switch(config-if-range)#switchport mo
Switch(config-if-range)#switchport mode t
Switch(config-if-range)#switchport mode trunk

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up


%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up


%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up

Switch(config-if-range)#sw
Switch(config-if-range)#switchport tr
Switch(config-if-range)#switchport trunk native v
Switch(config-if-range)#switchport trunk native vlan 99
Switch(config-if-range)#

ha howa khdmto f packet opinga liya